Bolt Action: US 1st Marine Corps

It's the final post of the year so I thought I'd sum up all my most recent progress on a new project, the US marines. I've had marines sitting in boxes around my house for years now. I first picked up a box of plastic guys when they were offered free with every purchase of the BA 2nd edition book. I then picked up some marine support weapons when they went on a flash sale about a year ago. Despite slowly accumulating marines, I hadn't gotten around to assembling or painting any. Until now.

So far I have completed 1 squad of 8 marines (ahem engineers with BAR's and a flame thrower), started another squad (engineers again), a Satan flame tank and a .30cal machine gun team. It's a modest start but a start nevertheless.

It took some time experimenting to get the uniform colours right. The Pacific conditions did horrible things to uniform colours so pinning accurate colours down was no easy task. Luckily, the internet is awash with helpful people willing to lend a helping hand. In the end I used Russian Army Uniform green as the base colour and highlighted it with mixes of Green Grey. The helmet cover is based with Cork Brown and highlighted with Pale Sand. The camouflage is simply two different shades of brown added in small blotches randomly.  

The bases have been embellished with jungle tufts and a second darker tuft. I also added paper foliage from Mig and some plastic ferns from a German train scenics manufacturer. 

That's it from me this year. Cycle down for commentary on the different units I have finished.

This machine gun team is made by the Assault Group. They're great figures but the faces can be a bit 'flashy', which damages them during clean up. This leads to some disfigurement and dodgy looking expressions! Regardless, the uniform and gun quality was top notch and it gives me some variety over the Warlord Games version.

I also converted a Stuart Satan from the Warlord plastic kit. This was an extremely simple conversion. Simply a barrel replacement and that was that! The kit came with the optional external fuel tanks, which was brilliant. Thank you for that Warlord. 

M4A3 Sherman (76mm). 'Down Necker'

Hi all, my crusade to renovate the tanks in my case has continued this week with a Warlord Games 76mm Sherman with wooden armour. Before I began, she was a tad boring. No pin-up, only one weathering powder application and no grass tufts meant she stood out amongst my other vehicles. Therefore, I decided to bring her back up to scratch. First, I tidied up all the dents and scratches that had occurred through use in the case. Then, I applied several alcohol based washes of weathering powders to the various areas of the tank. Next, I applied the 'Down Necker' decal to the space I'd left free the first time around. I also brushed on a few layers of weathering powders dry. I was sceptical that this would work at first but I am now pleased with the results. Finally, I added two colours of grass tufts to the base. I'm hoping to add additional stowage to this vehicle when the Rubicon stowage set is released!

M26 Pershing. Bessy gets a makeover

I've continued to root through my army case for vehicles that need a little touch up and a little repair. Consequently, I came across my M26 Pershing, a model I bought at the beginning of my journey into Boltaction.

I bought the model at the Derby Games Convention because friends of mine wanted to take advantage of the 10% off for 3 models deal! I came away with a Pershing and my friends picked up a Tiger II and an IS-2.

Unfortunately, the M26 is way too expensive for regular games of Boltaction and so it's seen very little use. It is a cool tank though, so I might try and write a list to incorporate it.

Anyway, I took it out of the case and gave it some TLC over the weekend. It was a bit chipped in places and the weathering wasn't quite up to scratch. The base was also quite large so I trimmed that down. I like tanks on bases but they can sometimes get in the way so the smaller the better.  

So there we have it, another tank refreshed and back in service. Let's see what I can find next...

M36B1 Jackson. It's finally painted!

So it seems that I've a couple of tanks sitting on my painting table for what feels like an age! Fortunately, this Jackson is the last (before I build the 2 tanks I still have in boxes!) and I'm mightily relieved to finally have it gone.

Sadly, it's unlikely to see much table time on account of it's crazy points cost but I'm sure it will make at least a few appearances in tank wars games. We shall see.

 I really like crew models in the turrets of tanks but these guys took forever to paint! They add life to the vehicle but I'd be lying if I claimed to enjoy painting them.

This vehicle does of course join the ranks of my fictional tank unit, the Warbirds. Unfortunately, she doesn't yet have a name or a pin-up. That's a job for another day I think.
 

Upgrading to a 'big boy' mortar: 4.2" chemical mortar

Goodness me it must be Christmas as I'm actually following up on my promises! Yesterday I said that I would be building and painting a US 4.2" heavy mortar from scratch and then sharing the results with you. Well, as expected, that's exactly what I did and it's exactly what I'll do.

First, here's the mortar before paint. I built it from some random bits I have left from a 1:35 scale Abrams tank kit and plasticard. It was a little bit fiddly to put together but wasn't altogether complicated.

This image of a real heavy mortar is what I used to base most of the details on. It's 'more or less' accurate and I think it's fine for table-top standard. There seems to be some variety in the construction of these mortars from looking at different pictures so the little differences shouldn't be too bad. 

Here it is with some crew models. I've used crew from other guns that I had. They fit in fine except for the bazooka loader, who's bomb is far too small for the mortar. See the historical picture above for reference to shell sizes. Perhaps I'll scratch up a new loader if I have time. 

 I thought it would be of some use to compare the sizes of the small, medium and heavy mortars. I'm a little concerned that my heavy mortar is too big. Having said that, I don't think it's 'silly' too big, especially when looking at the reference photo above. Let me know what you think.

Motorised Artillery: the M8 Scott

Unfortunately, progress has been slow on the remaining 4 Rangers due to a heavy week in work so I don't have an update on them today.

Instead, I was able to find some time to apply the final touches to my Rubicon M8 Scott. I sourced the crew from the Westwind half-track crew set. Originally, I was pretty annoyed when I received the Westwind crew because they are absolutely tiny in comparison with all my other 28mm miniatures so I wasn't able to use them on my own half-track. However, they do make good open-topped crew figures for Rubicon tanks as their diminutive size allows them to squeeze in nicely. Phew, finally a use for them!

Smurf scratch builds a T27 rocket Jeep!

Assemble the dough boys, we have a new toy!

Recently I've been looking through the US options for boltaction that aren't currently covered by a model. One particular addition I wanted to make was a rocket battery to support my plucky GIs and dish out some much deserved retribution to Jerry!

I started to do some research on the T27 rocket battery and came across some images of them mounted on Jeeps. Other versions were mounted on a tripod without wheels, which I thought might make it a bit difficult to move around (unlike the Nebelwerfer). Luckily, trenchworx make a really lovely T27 rocket launcher, which I intended to mount on the back of a warlord Jeep. 

Unfortunately, despite being a wonderful model, the tripod was slightly too big to mount and the historical details were all wrong anyway! Instead, I decided to scratch build my own rocket launcher and mounting. 

The trickiest part of this build was the Jeep itself! Goodness me it was fiddly, with badly miscast metal parts and no instructions. Luckily there's a million reference photos on-line, but still, a nightmare I could have done without.

Anyway, the launcher was fairly simple to assemble. I heavily borrowed from this article as a reference and source of inspiration. The launcher was mainly made from cotton bud rods (I used Boots own brand which are perfectly scaled) and thin plasticard.

The most difficult part to mounting the launcher was removing the resin back seat from the Jeep model. I achieved this with the help of a Dremel, but it was still quite fiddly and took a lot of concentration. There's also a couple of stowage bags in the back, which I decided to leave in. In hindsight I'd recommend removing them too, as they got in the way of the launcher mounting.

Overall I very pleased with the result. In game terms, I'll be using it as a normal rocket battery (You seriously don't want it mounted on a softskin transport anyway!). I also have some crew members to stand behind the Jeep and prepare the rocket launcher to fire. I'll post more on this characterful addition once it's fully painted! Until then, have fun.